12
4. Set the
SQUELCH
control to
AUTO
for the factory setting. Or, manually set squelch
as follows:
■
Think of squelch as a gate. Turn
SQUELCH
fully counter clockwise. This
raises the “Squelch Gate” so high that only very strong signals can
get through.
■
Turn
SQUELCH
fully clockwise until you hear a hiss. This lowers the
“Squelch Gate” so that everything gets through — noise, weak signals, and
strong signals.
■
Turn
SQUELCH
back counter clockwise until the hiss stops. Now the
“Squelch Gate” allows only strong signals through.
To Next Page
Loading...
Need help?
General
