Uniden BC355C - Scanning Service Bank Tips

32
NOTE: The AIR and MRN banks share 100 PRIVATE channels. These
user-programmed channels are scanned after preprogrammed
channels.
Scanning Service Bank Tips
If You Want to do This - Here’s How -
Begin scanning Press any service bank key; the bank
label ashes and the “SCAN” message
moves across the display screen.
Scanning automatically stops on
an active channel and displays that
frequency (except for locked-out
channels, which will be covered later
in this guide). It will stay on that
channel until the transmission ends.
Note: You must program
channels into the PRIVATE bank
before you can scan it.
Set up multiple service
banks to scan
Press a desired service bank’s key until
it displays. Continue pressing other
banks’ keys until all desired banks are
displayed (activated).