57
PROGRAM LOCK FEATURE
The BC355C has a Program Lock feature to prevent accidentally
programming entries or unauthorized programming. Press and
hold the PROG key for longer than 2.5 seconds to toggle Program
Lock on and o. Program Lock is available in the following modes:
Scan/Scan Hold
Band Search/Band Search Hold
Programming
Close Call
When Program Lock is turned on, the scanner displays “on Prg‐
Loc” and then returns to scanning mode. Press and hold the PROG
key again to unlock this function and return to the previous mode.
Attempts to program on a bank with Program Lock activated will
display “Prg‐Loc“ as a reminder. When Program Lock is turned o
(press and hold PROG for longer than 2.5 seconds), the scanner
displays “OF Prg‐Loc” and returns to the previous mode.
•
•
•
•
To Next Page
Loading...
