Uniden BC355C - Setting C - C.alet Options; Setting C - C.PS Options

48
Scroll up or down to select bands for Close Call to monitor.
Press PROG. The screen displays that selection and “On.”
b1 lo on
▲▼
Setting C ‐ C.ALEt Options
This menu controls whether the scanner will send an alert tone
when a Close Call signal is detected. The options are:
ALt.bEEP - Scanner beeps when a CC signal is found.
ALt.OFF - Scanner does not been when a CC signal is found
Setting C ‐ C.PS Options
This menu controls whether the scanner will screen common
pager frequencies. The options are:
PS .On - Scanner screens out pager frequencies (lter on).
PS.OFF - Scanner allows pager frequencies (lter o).
2.
•
•
•
•