Uniden BC355C - Page 60

60
PROBLEM SOLUTION
Scan won’t stop
Try one of these options:
Check and adjust Squelch
Check the antenna connection.
Check to see if all channels are locked
out. It is possible that none of the
programmed frequencies are active at
the time. Try the band search.
•
•
•
Scan won’t start
Try one of these options:
Press the bank key again.
Adjust the Squelch Control.
Scan program frequencies into the bank
before using (for PRIVATE bank).
•
•
•
Search won’t
start
Adjust the Squelch Control.
Check the antenna connection.
•
•
PROGRAM key
won’t work
Stop scan or search.
You still have a
problem
Call our customer hotline at 1-800-297-1023.