Uniden CLX 485 Series User Manual

Using Your Phone
[39] Using Your Phone www.uniden.com
Moving out of range
If you move your handset farther from the base unit during a call, you might start
to hear more noise than usual. If you go too far from the base, you will hear a beep
and see
No Signal Press HELP . Press the HELP soft key on the display.
Call Waiting
If you hear a call waiting tone while you are on a call, press talk/flash or /flash
on the base to switch to the new call. After a short pause, you will hear the new
caller. Press talk/flash or /flash on the base again to go back to the original
caller.
Call Waiting Deluxe
If you subscribe to Call Waiting Deluxe (CWDX) from your phone
company, you have several different options when you get a call
waiting call. When you hear the call waiting tone, instead of
answering the call, you can press the center of the joystick or
menu/select on the base, or the OPTION soft key, and then
select
CallWaitDeluxe . Use joystick or the up/down key or press
1-7 to choose from the following options:
%CNNQRVKQPU
5'.'%6
  /WVG

 %CNN9CKV&GNWZG

 %CNN4GEQTF

 #WFKQ6QPG

 %CNN2TKXCE[
•To scroll through the
help, press the >>|
soft key.
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID with call
waiting service.
•Your phone can't show
call waiting caller ID
information when a
call is on hold.
•To use CWDX feature,
you must set Call
Waiting and
CallWaitDeluxe to On
in the system setup
menu (see page 27).
note

Uniden CLX 485 Series Specifications

General

Brand	Uniden
Model	CLX 485 Series
Category	Cordless Telephone
Language	English