14
3. Plug the Telescoping Antenna into the ANT connector. Extend
the antenna to its full height. For frequencies higher than 400
MHz, shortening the antenna may improve the reception.
Use the desktop stand (fold out from bottom of unit) for a better
viewing and operating angle. Helpful Hints
• If strong interference or electrical noise is received, relocate
the scanner or its antenna away from the source.
• If you are operating the scanner in a fringe area or need to
improve reception, use an optional antenna designed for
multi-band coverage. (You can purchase this type of antenna
at a local electronics store.)
• If the optional antenna has no cable, use 50-70 ohm coaxial
cable for lead-in. A mating plug may be necessary for the
optional antennas.
FOR MOBILE USE INCAR INSTALLATION
Temporary Mobile Installation
A Vehicle Power Adapter is provided for an easy, temporary power
supply.
UB367ZV_UBC355CLT_1208.indd 14UB367ZV_UBC355CLT_1208.indd 14 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
