47
You cannot turn o all bands. If you turn o all bands, b1 Lo
(VHF Low Band) is automatically set to ON.
Setting
Options
This menu controls whether the scanner will send an alert tone
when a Close Call signal is detected. The options are:
•
- Scanner beeps when a CC signal is found.
• - Scanner does not beep when a CC signal is found
Close Call Tips
If You Want To - Here’s How -
Scan for Close Call
Transmissions while
Scanning other
Banks/Bands
Press the key. The Close Call icon
displays. Every two seconds there will be
a break in the scanner audio as it searches
for a nearby transmission.
UB367ZV_UBC355CLT_1208.indd 47UB367ZV_UBC355CLT_1208.indd 47 2011/12/08 19:55:582011/12/08 19:55:58
To Next Page
Loading...
Need help?
General
