27
USING YOUR UBC355CLT SCANNER
SET UP
Adjusting Squelch
To Adjust Squelch -
1. Turn SQ completely
counterclockwise. You should
hear open squelch noise.
2. Turn SQ clockwise slowly until
the sound disappears. This is
the threshold point at which the
incoming signal is just slightly
stronger than the noise will open
the squelch.
3. Adjust the volume to a
comfortable listening level.
UB367ZV_UBC355CLT_1208.indd 27UB367ZV_UBC355CLT_1208.indd 27 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
