34
Searching Band Tips
If You Want to Do This - Here’s How -
Begin searching Press the BAND/STEP key. The screen
displays the last known searched
band and then begins searching for
an active frequency in that band.
Continue after the
UBC355CLT has stopped
on an active channel
If the UBC355CLT stops on an active
channel that you do not want to
monitor but you do not want to lock
out, press the SEARCH key or the UP/
DOWN keys.
Stop searching Press HOLD
. The scanner stays on the
displayed frequency until searching
is resumed. Press HOLD again to
resume searching.
Select a di erent band
to search
Press the BAND/STEP key multiple
times to search through the available
bands.
UB367ZV_UBC355CLT_1208.indd 34UB367ZV_UBC355CLT_1208.indd 34 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
