33
If You Want to do This - Here’s How -
Resume scanning
(Cont.)
• Any bank key - If you press a di erent
bank key, you will start scanning in
that new bank and the bank label will
resume ashing.
• L/O key - Press this key to lock out
this frequency and step to the next
frequency.
Keep scanning after the
UBC355CLT has stopped
on an active channel
If the UBC355CLT stops on an active
channel that you do not want to
monitor but you do not want to lock
out, press the UP key. You will scan to
the next frequency.
Select a di erent bank
to scan
Use one of the following two
methods:
1. Use the UP key to move through
frequencies and banks.
2. Deactivate the bank(s) you do
not want to listen to, leaving only
the desired band active.
UB367ZV_UBC355CLT_1208.indd 33UB367ZV_UBC355CLT_1208.indd 33 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
