51
Programming a Channel
The following steps detail how to program a frequency into a
channel for a speci c bank when the frequency was found while
scanning or searching. In this example, the frequency was found
while scanning the Freenet (FRN) bank.
This SCAN screen shows
that frequency 149.025
has been found through
a search of the active
( ashing) Freenet (FRN)
bank.
Press HOLD. HOLD displays.
Press PROG. CH displays
and ashes.
UB367ZV_UBC355CLT_1208.indd 51UB367ZV_UBC355CLT_1208.indd 51 2011/12/08 19:55:582011/12/08 19:55:58
To Next Page
Loading...
Need help?
General
