53
Press PROG. The scanner
programs the frequency
into the indicated channel
and then goes into SCAN
HOLD mode.
Press HOLD to release the
Hold and continue scanning
the rest of the programmed
channels, starting with
the channel you just
programmed.
Deleting a Programmed Frequency (programming “000.0000”)
The easiest method of deleting a frequency you have
programmed is to overwrite it with a null frequency (000.0000).
From a normal scan setting
(a channel bank is ashing),
press PROG. HOLD displays
and CH displays and ashes.
Press and hold L/O for 2.5
seconds.
UB367ZV_UBC355CLT_1208.indd 53UB367ZV_UBC355CLT_1208.indd 53 2011/12/08 19:55:582011/12/08 19:55:58
To Next Page
Loading...
Need help?
General
