44
3. Close Call O
Pressing and holding the
key activates Close Call Only mode.
Close Call Priority
Repeatedly press
until the Close Call Priority icon displays.
The scanner checks every 2 second for a nearby transmission. You
may hear a slight break in audio during this time. If you want to
monitor only Close Call hits, hold the
key for longer than 2.5
seconds. The Close Call Priority icon ashes.
Close Call Do Not Disturb
Repeatedly press until the Do Not Disturb icon displays.
The scanner will periodically make Close Call checks whenever it is
not receiving audio in another mode.
Close Call Only
Press and hold until the scanner displays a line of dashes and
the icon ashes. The scanner is now in Close Call Only mode. It will
only try to nd Close Call transmissions. This is also the rst step to
accessing the Close Call Setup modes.
UB367ZV_UBC355CLT_1208.indd 44UB367ZV_UBC355CLT_1208.indd 44 2011/12/08 19:55:582011/12/08 19:55:58
To Next Page
Loading...
Need help?
General
