21
KEY PURPOSE
CLOSE CALL
Press this key to begin monitoring for strong,
nearby signals. Pressing this key cycles
through the frequencies in the following
order:
• Close Call ® Priority - CC checks
for Close Call hits every 2 seconds while
monitoring other frequencies. You will
hear a slight break in reception while
Close Call Priority is on.
• Close Call Do Not Disturb - Checks
for Close Call hits every 2 seconds
unless the scanner is already receiving a
transmission. This prevents the breaks in
audio, but can check less often.
• Close Call Only - Press the Close Call key
for longer than 2.5 seconds. The Close
Call Priority icon ashes to indicate this
mode.
UB367ZV_UBC355CLT_1208.indd 21UB367ZV_UBC355CLT_1208.indd 21 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
