24
KEY PURPOSE
BAND/STEP You can change the steps of each band. To
change steps, press and hold BAND/STEP
key while band search.
Pressing this key displays the upper/lower
limits of a band range for 3 seconds (i.e.,
406:440) and then begins searching that
band range. Note, on the display the band
upper/lower limits are separated by the
colon. Continue pressing the BAND/STEP
key for other searchable bands.
PROG Press this key to initiate and complete
programming a channel or frequency
(further detail is provided in a later section).
Note: If you press a non-
programmable bank key AIR/
MARINE or CB AM/FM, ”
” will
be displayed; press a programmable
bank key.
UB367ZV_UBC355CLT_1208.indd 24UB367ZV_UBC355CLT_1208.indd 24 2011/12/08 19:55:572011/12/08 19:55:57
To Next Page
Loading...
Need help?
General
