62
PROBLEM SOLUTION
Scan won’t start
Try one of these options:
• Press the bank key again.
• Adjust the Squelch Control.
• Program frequencies into the bank
before using (for PRIVATE bank).
• Check to see if all channels are locked
out. It is possible that none of the
programmed frequencies are active at
the time. Try the band search.
Search won’t
start
• Adjust the Squelch Control.
• Check the antenna connection.
PROG key won’t
work
Stop scan or search.
UB367ZV_UBC355CLT_1208.indd 62UB367ZV_UBC355CLT_1208.indd 62 2011/12/08 19:55:582011/12/08 19:55:58