Unify OpenScape 35 G HFA - Setting headset port use

Individual phone configuration 107
Setting headset port use
Here you set whether you are using a wired or cordless DECT headset.
z
You can also configure the following setting via the web interface Æ Page 112.
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select and confirm the relevant option
1
shown in the context menu:
• Wired headset
• Cordless headset
• Conference unit
Select and confirm the option shown.
User f
Audio f
Settings l
Headset socket f
Wired headset l
1. The phone displays the current setting
Option = Save & exit? l