Making calls in the team/executive/secretary configuration 91
Deactivating call forwarding
Settings Open the menu Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
R Press the required line key.
or
j Enter the required trunk number.
or
R If available, press the "CFW MULAP" key.
Understanding LED messages on the "CFW MULAP" key
S The LED on the "CFW MULAP" key is off – call forwarding is not active for this
trunk.
or
R The LED on the "CFW MULAP" key lights up – call forwarding is active for this
trunk.
or
T The LED on the "CFW MULAP" key flashes slowly - the trunk is the destination
of call forwarding.
Program/Service?
l
Forward Line: Off
If you have activated call forwarding for a trunk, a special dial tone sounds
when the line is seized.
To Next Page
Loading...
