42 Enhanced phone functions
Making calls using system speed-dial numbers
Prerequisite: You know the system speed-dial numbers (consult your
administrator).
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown
1
.
j Enter a three-digit speed-dial number
2
.
if nec.
Suffix dialing
j If necessary, you can suffix-dial additional digits (for example, the user's
extension) at the end of the saved station number.
If this feature is configured, a suffix is automatically dialed (for example, "0" for
the exchange) if no entries are made within 4 or 5 seconds.
Dialing with speed-dial keys
Prerequisite: You have configured speed-dial keys Æ Page 42.
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown
[1]
.
) Press the key shown.
j Press the required speed-dial key
2
.
Configuring a speed-dial key
You can program the keys 0 to 9 with ten frequently used phone
numbers.
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown
[1]
.
Confirm the option shown.
) Press the key shown.
j Press the required speed-dial key. If the key is already in use, the programmed
phone number appears on the screen.
Confirm the option shown.
j First enter the external code and then the external station number.
Confirm the option shown.
Program/Service?
l
*7=Use speed dialing?
1. ”Differing display views in a HiPath 4000 environment” Æ Page 111
2. Pay attention to the notes on voice encryption
Æ Page 63.
Program/Service?
l
*7=Use speed dialing?
Program/Service?
l
*92=Change speed dial?
Change?
Change
Save
To Next Page
Loading...
