Programming the function keys 55
Programming the function keys
You can program frequently used functions, station numbers or procedures onto
the function keys on your OpenScape Desk Phone IP 35 G or key module.
Configuring function keys
Please see also the information on Æ Page 15.
Example: Programming the Shift key
Settings Open the menu Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
if nec.
Select and confirm the option shown.
Some functions (e.g. with "Call forwarding") can be saved even if they are
incomplete. This means that when later initiating the function by pressing the
button, further inputs are required.
Confirm the option shown.
or
Select and confirm the option shown.
The label appears automatically and cannot be changed for the Shift key. It can
be changed for all other functions.
The LED displays show the status of the function
Æ Page 15 and Æ Page 56.
A list of all available functions is displayed, see the overview Æ Page 56.
Program/Service?
l
*91=Prog. feature key
Change key
More features g
Shift key
Save incomplete
Exit
Another key
To Next Page
Loading...
