58 Programming the function keys
Programming a procedure key
Numbers and functions that require further input, i.e. which contain several
operating steps, can be saved on a key on your telephone. The relevant
administrator must have granted the appropriate authorization.
For example the function "Associated dialing"
Æ Page 45 together with the
required input (phone number of the phone for which the call is to be made +
phone number to be dialed) can be saved on a key.
Numbers that require further input can also be saved.
Please see also the information on
Æ Page 15.
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter procedure. Example: *67 231 123456
*67 Code for associated dialing
231 Number of the phone for which the call should be made
12345 The number to be dialed.
if nec.
S Press the "Pause" key to enter pauses (a "P" appears on the display).
Confirm the option shown.
or
If you make a mistake:
Select and confirm the option shown. This deletes all numbers entered.
Confirm the option shown.
or
Select and confirm the option shown.
Program/Service?
l
*91=Prog. feature key
Change key
More features g
Procedure key g
Save
Previous
Exit
Another key
Select the saved procedure by pressing the key.
Procedures with activatable/deactivatable functions are activated by
pressing the key once and deactivated by pressing it again.
You can press the procedure key during a call to automatically send the
saved digits as DTMF signals
Æ Page 51. For display messages when
saving procedures, see
Æ Page 115.
To Next Page
Loading...
