Enhanced phone functions 51
Removing parties from the conference
Select and confirm the option shown. The first party is displayed.
Confirm as often as required until the desired party appears.
Select and confirm the option shown.
Leaving a conference
Select and confirm the option shown.
or
\ Replace the handset if this feature is configured (consult your administrator).
Ending a conference
Select and confirm the option shown.
or
\ Replace the handset if this feature is configured (consult your administrator).
Removing the central office party from the conference
Select and confirm the option shown.
Activating tone dialing/DTMF suffix dialing
You can transmit dual-tone multifrequency (DTMF) signals to control devices
such as an answering machine or automatic information system.
Settings Open the menu
Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
j You can use the keys 0 through 9, * and # to transmit DTMF
signals.
View conf parties?
Next?
Remove party?
If a participant who was connected to the conference via an unencrypted
line leaves, the conference remains unsecured.
Leave conference?
End conference?
Drop last conf. party?
Program/Service?
l
*53=DTMF dialing?
Ending the call also deactivates DTMF suffix dialing.
Your system may be configured so that you can start DTMF suffix dialing
immediately after setting up a connection.
To Next Page
Loading...
