36 Enhanced phone functions
Opening the door from your telephone during a call from the
entrance telephone
Confirm the option shown.
Opening the door from your telephone without calling the entrance
telephone
Settings Open the menu Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
j Dial the entrance telephone number.
Opening the door with a code (at the door)
j After ringing the bell, enter the five-digit code (using the keypad or a DTMF
transmitter). Depending on how the door opener has been programmed, a door-
bell call signal may or may not be forwarded.
Activating the door opener
Settings Open the menu Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
j Dial the entrance telephone number.
j Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press "OK" to change the code.
Select and confirm the option shown.
or
You can also open the door without a doorbell ring.
Deactivating the door opener
Settings Open the menu Æ Page 19.
Select and confirm the option shown.
Select and confirm the option shown.
Open door?
Program/Service?
l
*61=Open door?
Special features must be taken into consideration if your telephone oper-
ates with system networking via LAN
Æ Page 102!
Program/Service?
l
*89=Door opener on?
3=change password?
1=enable with ring?
2=enable without ring?
Program/Service?
l
#89=Door opener off?
To Next Page
Loading...
