84
Handset
The active cursor position flashes . . . change cursor position
with . . . switch between cursor positions with
Enter date:
¤ . . . using enter the day, month and year in 8-digit format.
Enter time:
¤ . . . using enter hours and minutes in 4-digit format.
Save settings:
¤ Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤ Press and hold the End call key
The telephone is now ready for use.
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
• Attaching the belt clip: Press the belt clip onto the back of the
handset so that the tabs on the belt clip click into place in the
notches.
• Removing the belt clip: Press the centre of the belt clip firmly
with your right thumb. Push the nail of your left thumb up
between the clip and the casing. Slide the clip upwards to
remove.
Professional belt clip (accessory)
Attaching the belt clip:
¤ Press the holder on the back of the handset so that the tabs click
into place in the notches .
¤ Secure the belt clip on the belt .
¤ Hook in the handset with holder into the belt clip and push
it down .
¤ Press the display key Time
or, if the date and time have already been set:
¤ . . . use to select Settings OK Date/Time
OK
TimeCalls
Date/Time
Date:
15.08.2021
Time:
00:00
Back Save
1
1
2
3
4
To Next Page
Loading...
Need help?
General