Handset 37
Automatic volume control
The phone is able to automatically adjust the volume of the receiver and ringtone to the ambient volume.
Here you can set the sensitivity with which the phone reacts to changes in noise level (Very High, High,
Medium, Low, Very Low).
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call volumes, here
you can compensate the audio setting characteristics of your headset.
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you improved acous-
tics in loud environments and when there are echoes.
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much as possible
to the surroundings. Check which is the most comfortable profile for you and your caller.
Earpiece Profiles: High frequency or Low frequency (default setting)
Handsfree Profiles: Standard (default setting) or Reduced Echo
Ringtones
Ringtone volume
Ringtone melody
Crescendo is not set for the ringtone volume ( p. 37).
¤ . . . Use to select Settings OK Audio Settings OK Smart
Volume OK Earpiece Volume / Ringtone Volume Edit
Enable/disable: ¤ Activation: Use to select On or Off
Adjust the sensor: ¤ Sensitivity Use to adjust the sensor sensitivity
Save: ¤ Save
¤ . . . Use to select Settings OK Audio Settings OK Corded
Hdst Boost Use to set the volume Save
¤ . . . Use to select Settings OK Audio Settings OK Mic
Sensitivity OK Use to select what the setting applies for (Earpiece / Corded
headset) Use to adjust the sensitivity Save
¤ . . . use to select Settings OK Audio Settings OK
Acoustic Profiles Earpiece Profiles / Handsfree Profiles OK use to
select profile Select ( = selected)
¤ . . . use to select Settings OK Audio
Settings OK Ringtones (Handset) OK
Volume OK use to select For internal calls and
alarms or External Calls use to set volume in 5 levels
or in crescendo mode (increasing volume) Save
Changes are only saved permanently in Profile
Personal.
Set different ringtones for internal and external calls.
¤ . . . use to select Settings OK Audio Settings OK
Ringtones (Handset) OK Melodies OK use to select the
connection use to select the ringtone/melody in each case Save
Volume
For internal calls
and alarms:
< >
External Calls:
Back Save
Example
To Next Page
Loading...
Need help?
General