144
Open using the Softkey. The current name is displayed.
The predefined name is entered.
j Change to the desired name and conclude your input with the Softkey.
Save the setting by selecting the Softkey.
Managing Bluetooth devices
The following functions are available in the Bluetooth pairing manager:
• Adding Bluetooth devices
• Delete Bluetooth device list
• Connect or disconnect paired Bluetooth devices
• Remove single Bluetooth devices from the list
• Rename Bluetooth devices in the list
Adding Bluetooth devices
@ If nec. Press Main Menu key.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Paired devices are displayed. Start the search for new devices with the Softkey.
If nec. Start or set the pairing function on the Bluetooth device.
Located devices are displayed. Repeat the search if appropriate with the Soft-
key.
If at least one new device was found, select the relevant Bluetooth device and
open with the Softkey.
Confirm the pairing prompt with the Softkey. The Bluetooth device is paired and
added to the list.
Phone name
K
_
¾
OpenScape CP600 75:7E:FF
Q
_
Q
_
The OpenScape CP600 is visible for other Bluetooth devices in the vicinity
when you are in this menu.
If your Bluetooth device has a NFC reader (Near Field Communication), it
can be paired very easily with your OpenScape CP600, see ïƒ page 126.
Service/Settings
_
$
User:
-
_
$
Bluetooth
-
_
Paired devices
-
_
Paired devices
Õ
_
Add device
Õ
_
?
Headset
è
_
Accept
Q
_
To Next Page
Loading...
Need help?
General