Chapter 1
Getting Started
Introducing the HT682
The HT682 is a rugged, compact and ergonomic handheld
PDA Scanner powered by the WinCE. NET OS to enhance
your work more efficient and profitable. It incorporates an
integral barcode scanning 1D laser/ 2D imager device,
color LCD with touch screen, keypad, BT and wireless
communication interface capability. It provides the user with
a standard Windows-based environment for customization
and operation.
The following HT682 Product Reference Guide provides
simple step-by-step procedures to give you hands-on
experience with your HT682. For programming your
HT682, please refer to our SKD and programming manual.
Notice
1. This unit is equipped with a battery pack and backup battery. It is possible that the Unitech
HT682 may not be powered ON due to battery discharge as a result of storage. In the
above situation and the first-time use, plug the HT682 to the charging cable or charging
cradle (with 5V/2A AC-DC adapter), and charge the unused unit for over 16 hours in order
to fully charge its backup battery as well.
2. Under normal condition, the back-up battery will be charged from external power or the
main battery (if the main battery still has enough power to turn on). If it is charged for the
first time, the back-up battery will be fully charged while main battery is charged fully.
1