Unitech HT682 - Connecting the Device to Your Computer

Connecting the Device to Your Computer
1. After ActiveSync has been
installed, connect HT682 to your
PC as described in Connecting
the PDA Scanner to a host
(PC/Notebook) to a PC.
2. Turn the HT682 on.
3. ActiveSync starts automatically
and configure the USB port to
work with the HT682. The New
Partnership setup wizard
automatically starts.
NOTE: If ActiveSync doesn’t start automatically, click Start → Programs → Microsoft
ActiveSync.
NOTE: If a message appears indicating that it is unable to detect a connection, click the
Cancel button and manually configure the communication settings.
4. Follow the on-screen instructions.
5. When the configuration process
is complete, the Active-Sync
window appears.
6. Synchronization will be initialized and will take place if you’ve chosen to synchronize
periodically or upon connection.
NOTE: Your computer can create a partnership with multiple HT682s. Also, a HT682 can
create a partnership with up to two computers.
26