Unitech MS652 - Output Data Transmit

- 111 - © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
4.2 Output Data Transmit
4.2.1 Auto mode
In this mode, when scanner is out off BT transmit range, the scanned data will be
stored in the memory and transmit data automatically when back to in-range.
Auto mode*
4.2.2 Wedge mode
In this mode, the data only transmit while the BT is connected
Wedge mode
4.2.3 Batch mode
In this mode, the scanned data will be stored in the memory all the time and
transmit data only when BT is connected by scanned the “send batch” bar
code
Batch mode