- 125 - © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
4.9 Trigger Mode
Scan one of the following bar codes to select a trigger mode for the engine:
• Standard (Level) - A trigger press activates decode processing. Decode
processing continues until the bar code decodes, you
release the trigger.
• Presentation (Blink) - The engine activates decode processing when it
detects a bar code in its field of view. After a period of
non-use, the LEDs turn off until the engine senses
motion.
• Auto Aim - The engine projects the aiming pattern when it senses motion. A
trigger press activates decode processing. After two seconds of
inactivity the aiming pattern shuts off.
• Auto Aim with Illumination - The engine turns on the aiming pattern and
internal illumination LEDs when it senses
motion. A trigger press activates decode
processing. After two seconds of inactivity the
aiming pattern and internal illumination LEDs
automatically shut off.
• Host and Hardware Trigger Mode - A host command or trigger press issues
the triggering signal, which is
interpreted as a level trigger option.
To Next Page
Loading...
