Unitech MS652 - Procedure to Synchronize MS652 Date & Time with Host; Procedure to Update MS652 Firmware through USB Drive

- 124 - © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
4.7 Procedure to Synchronize MS652
Date & Time with Host
1. Connect USB drive to host: Double click trigger key with USB cable
connected
2. Open/Create file "ReadMe.txt"
3. Use Save As to save "ReadMe.txt" without name change to USB
Drive
4. Disconnect USB driver: Double click trigger key or press & hold for
2 seconds
4.8 Procedure to Update MS652
Firmware through USB Drive
1. Connect USB drive to host: Double click trigger key with USB cable
connected
2. Copy firmware file "MS652_FW_*.bin" to USB drive
3. Disconnect USB driver: Double click trigger key or press & hold for 2
seconds
4. MS652 will auto power off if firmware file is detected
5. Power on to reboot MS652.