-68- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
selection, scan Cancel.
• Length Within Range - Decode Codabar symbols with a specific length
range. Select lengths using the bar codes in
Appendix B, Numeric Bar Codes. For example,
to decode Codabar symbols containing between
4 and 12 characters, scan Codabar - Length
Within Range, and then scan 0, 4, 1, 2. To
correct an error or change the selection, scan
Cancel.
•Any Length - Decode Codabar symbols containing any number of
characters within the engine’s capability.
Codabar - One Discrete Length
Codabar - Two Discrete Lengths
Codabar - Length Within Range*
(Default: 5 to 55)
Codabar - Any Length
To Next Page
Loading...
