-72- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
• Length Within Range - Decode MSI symbols with a specific length range.
Select lengths using the bar codes in Appendix B,
Numeric Bar Codes. For example, to decode
MSI symbols containing between 4 and 12
characters, scan MSI - Length Within Range,
and then scan 0, 4, 1, 2. To correct an error or
change the selection, scan Cancel.
•Any Length - Decode MSI symbols containing any number of characters
within the engine’s capability.
Note: Due to the construction of the MSI symbology, it is possible for a scan line covering
only a portion of the code to transmit as a complete scan, yielding less data than is
encoded in the bar code. To prevent this, select specific lengths (MSI - One Discrete
Length, Two Discrete Lengths) for MSI applications.
MSI - One Discrete Length
MSI - Two Discrete Lengths
MSI - Length Within Range*
(Default: 4 to 55)
MSI - Any Length
To Next Page
Loading...
Need help?
General
