Universal Audio UAD User Manual

UAD Powered Plug-Ins Manual - 206 - Chapter 17: DreamVerb
Bypass The equalizer can be disabled with this switch. When the switch is off (black
instead of grey), the other resonance controls have no effect. This switch has
no effect on the direct signal path.
Band Amplitude Each of the five bands has its own amplitude (gain) control. The amplitude
range of each band is –30 dB to +20 dB.
To adjust the amplitude of bands 2, 3, and 4, grab the control bat for the band
and drag vertically or use the direct text entry method. For bands 1 and 5,
drag the horizontal line (these do not have a control bat).
Band Edge Bands 2, 3, and 4 have an Edge control. This parameter effects the band-
width of the band. To adjust the band edge, grab its control bat and drag hor-
izontally or use the direct text entry method.
The effect of the band edge on the filter sound can depend upon the settings
of the adjacent bands. For example, the sonic effect of this parameter is more
pronounced if the amplitude of adjacent bands is significantly different than
that of the band whose edge is being adjusted.
Figure 72. DreamVerb Resonance panel
Bypass switch Band Amplitude
control bats
Band 2, 3, and 4
Edge control bats
Band 1 (low
shelving) control
Band 5 (high
shelving) control

Universal Audio UAD Specifications

General

Operating System	macOS, Windows
Sample Rate Support	Up to 192 kHz
Category	Audio Processing
Format	VST, AU, AAX
DSP Processing	Yes
Plug-ins Included	Varies by bundle (e.g., Analog Classics, Lexicon, etc.)
Hardware Required	Universal Audio DSP Accelerator (e.g., Apollo, Satellite)