UAD Powered Plug-Ins Manual - 494 - Chapter 48: RealVerb Pro
3. Drag the Decay Time control for the late-field reverberations left or right
(from 0.10–96.00 seconds) to affect the length of the reverb tail. The De-
cay Time is indicated in the text field at the bottom of the Timing panel.
4. To affect how quickly the late-field reverberations become more dense, ad-
just the Diffusion control at the right of Late Reflection display in the Timing
panel. The higher the Diffusion value (near the top of the display), the more
rapidly a dense reverb tail evolves.
Positioning
One of the unique features of RealVerb Pro is the ability to separately position
the direct path, early reflections, and late-field reverberation. The Position
panel (see Figure 163) provides panning controls for each of these reverb
components. In addition, a proprietary Distance control adjusts perceived
source distance. These controls allow realistic synthesis of acoustic spaces—
for instance listening at the entrance of an alley way, where all response com-
ponents arrive from the same direction, or listening in the same alley next to
the source, where the early reflections and reverberation surround the lis-
tener.
To pan the direct (dry) signal:
1.
Drag the Direct slider left or right. A value of <100 pans the signal hard
left; a value of 100> pans the signal hard right. A value of <0> places the
signal in the center of the stereo field.
Figure 163. RealVerb Pro Positioning panel
To Next Page
Loading...
