UAD Powered Plug-Ins Manual - 348 - Chapter 32: MXR Flanger/Doubler
MXR Flanger/Doubler Latency
This plug-in uses an internal upsampling technique. The upsampling results in
a slightly larger latency than most other UAD plug-ins. See “Compensating
Upsampled Plug-Ins” on page 108 for more information.
Note: Compensating for additional latency is not required if the host appli-
cation supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs. See “Host PDC Implementation” on
page 101 for more information.
The MXR Model 126 Flanger/Doubler hardware unit
To Next Page
Loading...
