Universal Audio UAD User Manual

UAD Powered Plug-Ins Manual - 391 - Chapter 37: Neve 88RS Channel Strip
Power The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plug-in to reduce the UAD DSP load (load is not
reduced if “UAD-2 DSP LoadLock” on page 74 is enabled).
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
Note: You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.
WebZine Article
An article about the Neve 88RS console can be found in the “Analog Obses-
sion” article of the Universal Audio May 2007 Webzine (Volume 5, Number
4), published on the internet at:
• http://www.uaudio.com/webzine/2007/may/index4.html
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
The Neve 88RS at Skywalker Sound in California

Universal Audio UAD Specifications

General

Operating System	macOS, Windows
Sample Rate Support	Up to 192 kHz
Category	Audio Processing
Format	VST, AU, AAX
DSP Processing	Yes
Plug-ins Included	Varies by bundle (e.g., Analog Classics, Lexicon, etc.)
Hardware Required	Universal Audio DSP Accelerator (e.g., Apollo, Satellite)