UAD Powered Plug-Ins Manual - 116 - Chapter 10: UAD ExpressCard Products
UAD-2 SOLO/Laptop Details
Important: The information in these sections apply to UAD-2 SOLO/Laptop
ONLY. For UAD–Xpander instructions, see “UAD–Xpander Details” on
page 121.
Features • UAD-2 Solo in a self-contained, compact ExpressCard/34 package
(can be used in ExpressCard/54 slots with included adapter)
• 44.1-192k DSP Audio Accelerator for notebook computers
• Ultra-fast (2.5Gbps) ExpressCard/34 interface
• No external cables or power supply necessary
• Same potent DSP power as UAD-2 Solo
Package
Contents
The UAD-2 SOLO/Laptop package should contain the following items:
• UAD-2 SOLO/Laptop ExpressCard
• ExpressCard/34 to ExpressCard/54 Adapter
• UAD DSP Family Quickstart Guide DVD
• UAD Powered Plug-Ins software CD-ROM
• Important Information Sheet
• Universal Audio Full Line Catalog
SOLO/Laptop
System
Requirements
To use the UAD-2 SOLO/Laptop, your system must meet the minimum system
requirements for UAD Powered Plug-Ins (see “System Requirements” on
page 26) in addition to the UAD ExpressCard product-specific requirements.
UAD-2 SOLO/Laptop requires the following hardware and software:
• UAD Powered Plug-ins software v5.3.1 or higher (included)
• Available ExpressCard/34 or ExpressCard/54 expansion slot
• UAD version 5.5.0 or higher is recommended for best performance
Software
Installation
Install Software First
Software installation for UAD ExpressCard products is the exact same proce-
dure as those for UAD cards. Install the software before the hardware. Please
refer to “UAD Software Installation” on page 28 for detailed procedures.
To Next Page
