UAD Powered Plug-Ins Manual - 502 - Chapter 49: Boss CE-1 Chorus Ensemble
Vibrato Controls These two knobs control rate and depth of the vibrato
effect when CE-1 is in vibrato mode.
Depth Knob
The depth knob controls the intensity of the vibrato ef-
fect.
Rate Knob
The rate knob controls the rate of the vibrato LFO. The rate is indicated by the
the Rate LED indicator.
Note: When in chorus mode, the vibrato controls have no affect.
Power Switch This switch determines whether the plug-in is active. This is useful for
comparing the processed settings to the original signal, or to bypass
the plug-in to reduce the UAD DSP load (load is not reduced if “UAD-
2 DSP LoadLock” on page 74 is enabled).
Click the rocker switch to change the Power state.
To Next Page
Loading...
