New... Allows you to create a new Program and/or Installation.
Creating a new Program
1. In the Program and Installation Manager, tap New... and select Program.
2. On the Program screen, configure your new program as desired.
3. In the Program and Installation Manager, tap Save... and select Save All or Save
Program As...
4. On the Save Program As screen, assign a file name and tap Save.
5. In the File Path, verify that the new program name is displayed.
Creating a new Installation
Save your installation for use after powering down the robot.
1. In the Program and Installation Manager, tap New... and select Installation.
2. Tap Confirm Safety Configuration.
3. On the Installation screen, configure your new installation as desired.
4. In the Program and Installation Manager, tap Save... and select Save Installation
As...
5. On the Save Robot Installation screen, assign a file name and tap Save.
6. Select Set Installation to set installation for the current Program.
7. In File Path, verify that the new installation name is displayed.
UR10e 330 User Manual
24.Program and Installation Manager
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
