Unox MINDMaps CHEFTOP User Manual


STEP
R
EQUIREMENT TO DO LIST ILLUSTRATION
11
If the oven is one of the
following
■ XEVC-2021-GPX
■ XAVC-2021-GPX
■ XAVC-16FS-GPX
12
Mandatory
Perform
the gas
analysis
test by
choosing:
GAS
FUMES
TEST 2
-  
enter the
service menu
-  4
type the
PIN 99857
- 5
select
UTILI
TIES
- 6
select
CALI
BRATION
- 7
select GAS 2
FUMES TEST. The
oven will start at
minimum blower
speed
SERVICE MENU
OVEN SETUP
ACCESSOIRES SETUP
HOOD SETUP
PROVER SETUP
SLOWTOP SETUP
DECKTOP SETUP
UTILITIES
5
UTILITIES
BOARDS FIRMWERE VERSION
LOAD MODEL PARAM.
UPDATE FIRMWARE
CALIBRATION
6
CALIBRATION
GAS 2 FUMES TEST
GAS 1 FUMES TEST
7
1 2 3
4 5 6
7 8 9
. 0
OK
<-
SERVICE PIN
99857
3
4
PROGRAMSMIND.MAPSSET
CHEFUNOX
DATA
READY.COOK
CHEFTOP™
MULTI.TIME MISE.EN.PLACE
11:00 am 23/10/2014
READY
ROTOR.KLEAN
PROGRAMSMIND.MAPSSET
CHEFUNOX
ROTOR.KLEAN DDC STATS
READY.COOK
CHEFTOP MIND.Maps™ PLUS
MULTI.TIME MISE.EN.PLACE
23/10/2017
18:30
CHEFTOP
SLOWTOP
SETTINGS
USER SETTINGS
SERVICE MENU
NETWORK
1
2
13 Mandatory Proceed to STEP 6
14
If the emissions do NOT
match the range report-
ed on the UNOX techni-
cal chart in terms of CO
and CO
2
Proceed to STEP 7
Repeat steps 5, 6, 7, 9 also for
the second pre-mix group.
After the setting of the
second gas valve, recheck the
setting for the first one.
If required, readjust gas valve 1
and rerun gas fumes test 2.
127

Unox MINDMaps CHEFTOP Specifications

General

Brand	Unox
Model	MINDMaps CHEFTOP
Category	Commercial Food Equipment
Language	English