FLOOR
CHAMBER PROBE
OFFSET
Celsius degrees offset of resistor probe
(each 0.1 °C corresponds to 1 unit in the
parameter)
From -50 to
50
0
If you have a gap in the temperature reading it is possible to adjust the offset of the probes. Pay attention to
fact that the parameter range is +50 to -50 that equals to +5 °C to -5 °C. Therefore if Tset - Tchamber = +3.1 °C (for
instance Tset = 180 °C and Tchamber = 176,9 °C) you should set -31 in the back/bottom probe offset to compensate.
Thus 0.1 °C equals to 1 in scale of values.
PAY ATTENTION TO THE FACT THAT IF THE OVEN IS SET IN FAHRENHEIT THE PARAMETER IS STILL IN
CELSIUS. REMEMBER TO CONVERT EACH TEMPERATURE VALUE IN CELSIUS BEFORE MAKING THE
CALCULATION.
The oven measures the cooking cabinet temperature by means of the temperature probe close to the fan guard
at the bottom only. In the oven without the smoker device the second probe is close to the inner glass at the
bottom of the chamber, while in the oven with the smoker set up it is on the ceiling of the chamber close to the
fan guard. The front or ceiling temperature probe is just a backup of the back/bottom probe.
FORCE TROLLEY*
If it is ON prevents washing without
trolley in trolley ovens.
If it is OFF allows washing without
trolley in trolley ovens
*When the FORCE TROLLEY parameter is set to ON
it is not possible to cook without the trolley inside
the cooking chamber
Off
/On
Off in countertop
models/on in
trolley models
FUMES MIN
LIMIT TEMPERATURE
Set the lowest temperature limit of the
fumes probe
from 200 to 700 360
FUMES DELTA
LIMIT TEMPERATURE
Max temperature difference between
fumes and the allowed value
from 10 to 200 20
GAS TYPE
Type of gas which powers the oven
G20/G25/G30/
G31
G20
GRAPHICAL USER
INTERFACE
It makes possible to customize the
home page of the display showing,
hiding, skipping, locking and
deactivating the icons
OFF/ON OFF
HEATING ELEMENT
PROBE OFFSET
Celsius degrees offset of resistor probe
(each 0.1 °C corresponds to 1 unit in the
parameter)
From 0 to 50
0
HEATING VALUE
Parameter to set in order to consider in
the gas consumption calculation the
heating value of the oven
/
--
HOOD FAN DURING
COOKING
It allows to switch off the hood motor
during cooking. The motor switches
on at the end of the cooking program
ep of the cleaning
cycle to empty the chamber
OFF/ON ON
HOOD HALT DELAY
Number of minutes after cooking/
washing program the hood is stopped
From 1 to 60 2
HOOD TEMP
THRESHOLD
Minimum limit temperature which
activates the steam condenser (Celsius
degrees)
From 20 to 80
40
LANGUAGE
It allows to change the language of the
oven
ENGLISH, ITALIAN,
FRANCAIS,
ESPANOL,
DEUTSCH, CESKY,
РУССКИЙ, KOREAN,
SRPSKI, CHINESE,
SLOVENSKY,
PORTUGUÊS,
JAPANESE,
ROMANA, DANSK,
SVENSKA, POLSKI,
SLOVENŠČINA,
NEDERLANDS,
БЪЛГАРСКИ,
ΕΛΛΗΝΙΚΑ
,
MAGYAR, TÜRK,
HRVATSKI, EESTI
ENGLISH
To Next Page
Loading...
Need help?
General
