HUMIDITY
MEASUREMENT
Oven can measure the humidity inside
the cooking cabinet and accordingly
adjust the climate conditions (STEAM.
Maxi
TM
vs DRY. Maxi
TM
)
OFF, ON ON
LIMIT STEAM
The quantity of steam produced by
the oven is adjusted according to
the temperature set in the cooking
program. By increasing the temperature
set, the quantity of injected water is
reduced
OFF, ON ON
LIMIT STEAM (FAN
The quantity of steam produced by the
oven is adjusted according to the fan
speed set in the cooking program. By
decreasing the fan speed, the quantity
of injected water is reduced
OFF, ON ON
When no timer is activated in MULTI.
Time
TM
mode, the quantity of steam
produced by the oven is 0%
OFF, ON ON
LOAD MODEL PARAM.
LOAD MODEL
PARAM.
LOCK MANUAL
COOKING
It locks the manual cooking function
deactivating the relative icon on the
display
OFF
/ ON
OFF
LOCK USER PROGRAMS
It locks the user programs preventing
anyone to change the program
parameters
OFF/ON OFF
MANUAL FAT
COLLECTION
Activate/Deactivate the FAT collection
with the Pollo
TM
system
O
FF/on
OFF
MAX SPEED N. INVERS
The system doesn’t make the fan
reversion if the set speed is equal or less
than the value of this parameter
1/2/3/4
1
MAX STEAM.BOOST
TIME
It is available only in BakerTop units,
this parameter manages the time of
activation of Steam.BOOST
0 - 10
2
MAX PREHEATING
HOLDING
Time of permanence at the set
temperature only for BIG ovens
1 to 60 (minutes) 6
MINIMUM TEMP
PRECOOL
ΔT = Tch – Tsp at which the pre-cooling
function is activated
60 to 260 70
NETWORK
It allows the internet connection of the
oven
- -
NUMBER OF ROTORS
Insert how many rotor arms for
washing are in the cavity
From 1to 3 1
NUMBER OF TRAYS
This parameter indicates the number of
trays of the model
3/4/5/7
10/16/20
Tt depends on
the number
of trays of the
model
PREHEATING STEAM
A maximum of 30 % STEAM. Maxi
TM
is
produced at the end of the preheating
step starting from 8 °C (14,4 °F) below
the temperature set point
OFF, ON OFF
Load the corresponding parameters
of the model of oven by using the file
of the USB stick plugged.