Upright X26 Series - General Description; Introduction

Introduction 504165-002
Operation Manual Page 3
I NTRODUCTION
This manual covers operation of the X 26-32 Self-Propelled Work Platforms.
This manual must be stored on the machine at all times.
G ENERAL D ESCRIPTION
Figure 1: X 26-32
WARNING
!
!
DO NOT use the maintenance platform
without guardrails properly assembled
and in place
1. Platform
2. Elevating Assembly
3. Chassis
4. Power Module
5. Control Module
6. Platform Controls
7. Manual Case
8. Chassis Controls
9. Hydraulic Fluid Reservoir
10. Batteries