A.12 Addendum
80-83 Parts, Crosscut Knife Spindle Assembly: Add the following.
13785 - Crosscut Spindle Assembly, 8 mm, 18 knives, straight
85 Parts, Circular Knife Spindle Assembly: Add the following to the chart.
Size of Cut, 1/4", item 10, add 13019 - Slicing Knife Holder, 1/4", s.s.
Item 11, add 13710 - Stripper Plate, 1/8", s.s., light duty. The part number
listed, 13316, is a 1/8" stripper plate for slaw cuts.
Item 11, add 13711 - Stripper Plate, 5/32", s.s., light duty. The part number
listed, 13586, is a 5/32" stripper plate for slaw cuts.
There are reduced diameter spacers available with a 2.2" outside diameter.
Stripper plates for these reduced diameter spacers are also available. See the
entry for page 100 for more information.
Manual Page Number Revision
To Next Page