Page 21
LPH800 TREATER
MIX TANK
The LPH800 Treater includes a 30 gallon stainless steel chemical mix tank. This mix
tank will have electric drive agitation that is turned on or off from a manual switch.
The agitator should be running at all times when treatment is present in the mix tank to
keep the chemical mixed and in a suspended state. The tank is equipped with a
shut-off, drain plug, and drain valve located on the bottom. The top of the tank also
includes 3 extra ports which the operator can use to direct fill into the tank (see below).
CALIBRATION TUBE
The LPH800 Treater is equipped with a calibration
tube which is used to check the liquid flow rate.
The calibration tube measures in ounces, on a 0-340
scale and millimeters on a 0-10000 scale. Manual
valves direct liquid from different areas to keep all
liquid contained. This creates a closed chemical
system so that the operator can manually check the
calibration of the chemical flow rate without handling
any of the chemical.
To Next Page
Loading...
