Page 26
LPH800 TREATER
TREATER CONTROL PANEL
Refer to the control panel and the electrical schematic for proper voltage and amperage
of the machine. All green switches will illuminate when activated. The bottom row of
switches are spring return to center. The control panel controls the following functions:
Electrical Operation
Section
D
6
2
5 7
8 9 10 11 12
6
1 3 4
2
5 7
8 9 10 11 12
6
1 3 4
HIGH VOLTAGE ~ Always disconnect the power source before
working on or near the control panel or lead wires.
HIGH VOLTAGE ~ Use insulated tools when making
adjustments while the controls are under power.
AUTHORIZED PERSONNEL only shall work on the control
panel. Never allow anyone who has not read and familiarized
themselves with the owner’s manual to open or work on the
control panel.
To Next Page
Loading...
