Page 37
LPH800 TREATER
Metric Data
Below are two charts that show the potential volts and ml / min of two different pumps
at different dial settings.
All calibrations were done using water. Numbers are not exact,
only use these numbers as a starting point or for
troubleshooting.
Volts ml./Min.
9.2 669
13.3 1,074
17.5 1,480
21.6 1,885
25.8 2,291
29.9 2,696
34.1 3,101
38.2 3,507
42.3 3,912
46.5 4,318
50.6 4,723
54.8 5,128
58.9 5,534
63.0 5,939
67.2 6,345
71.3 6,750
75.5 7,155
79.6 7,561
83.8 7,966
87.9 8,372
1725 RPM Motor, 4.8:1 Reducer
and I / P Pump Head with
Masterflex I / P 82 Pump Tubing
Volts ml./Min.
10.5 219
14.6 302
18.8 417
22.9 524
27.0 630
31.2 737
35.3 843
39.4 950
43.6 1,056
47.7 1,162
51.8 1,268
55.9 1,375
60.1 1,482
64.2 1,588
68.3 1,695
72.5 1,800
76.6 1,908
80.7 2,014
84.9 2,121
89.0 2,227
6-600 RPM Motor and
L/S Pump Head with
Masterflex L / S 35 Pump Tubing
NOTICE
To Next Page
Loading...
