Preparation before Use
2-28
Embedded Web Server (Settings for E-mail)
Embedded Web Server is a tool used for tasks such as verifying the operating status of the machine and changing
the settings for security, network printing, E-mail transmission and advanced networking.
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the
FAX Operation Guide.
FAX functions available only ion products with the fax function installed.
The procedure for accessing Embedded Web Server is explaine
d below.
1 Launch your Web browser.
2 In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and Embedded Web Server as well as their
current status.
3 Select a category from the navigation bar on the left of the screen. The values for each category must be set
separately.
Enter the correct password to access pages other than the startup page. The default setting is admin00. The
password can be changed.
For details, refer to the Embedded Web Server Operation Guide.
To Next Page
Loading...
Need help?
General
